MicroBoards Technology GX-1 Dokumentacja Pobierz pdf (Strona 13)

MICROBOARDS TECHNOLOGY, LLC GX-1 DISC PUBLISHER

The GX-1 Disc Publisher and Discribe

Discribe is the application used to control the Burn and Print functionality of the Microboards GX-1. It

is able to set up publishing jobs, load the GX-1, burn to the loaded disc, unload the disc, and then

print the image you have selected.

Discribe should automatically find your GX-1 Disc Publisher and initialize the robotics and printer

when the application is opened. If the GX-1 does not initialize, you should verify the robotics

selection. This may happen if you have more than one robotic system connected to the Mac.

To check the robotics, select Test

Robotics… from the Discribe

Utilities menu.

If you have more than one robotic

system connected to your Mac, you

will need to have the Microboards

GX selected as the Robot. To verify

that you have made the correct

selections, click the Test Robot

button and follow the directions

provided in the test page.

The Open and Close buttons are used to verify that the correct drive has been selected. If a drive

other than that in the Microboards GX-1 responds to these buttons, the correct drive has not been

selected.

Click OK when the robotics are set correctly.

Please see the Discribe for Microboards Disc Publishers manual for more information on using

Discribe.

Print Only without Discribe

While Discribe does include a Print Only function under the Utilities menu, you can print from any

application to the GX-1 Disc Publisher. When printing using the GX-1 Disc Publisher from any

application, you should always choose GX Series and 120mm disc in the Format For and Paper

Size Page Setup selections, respectively.

It is highly recommended that the image you are printing is 120mm by 120mm. Having a

different size image may result in the improper placement of the image on the disc.

The robotics will not be available to load the media from any application other than Discribe, so you

will need to load the media manually. There are 2 important considerations to keep in mind when

loading media manually:

• Each disc must be manually placed on the belts below the input hopper rather than in the

input hopper itself.

• You can only load one disc at a time. If you place more than one disc on the belts at once, or

place a disc on the belts before the belts have completed the unloading of the prior printed

disc, the printer will generate an error and must be power cycled to clear the error.

Printing prior to burning any media is not recommended!!

1 2 ... 8 9 10 11 12 13 14 15

Brak uwag

MicroBoards Technology GX-1 Dokumentacja Strona 13